Depending on the axis type the following options are available:

- Cartesian Y Axes

- Show At Back - defines whether interlaced stripes must appear on the back chart wall.

- Show At Side - defines whether interlaced stripes must appear on the side chart wall. This setting is ignored when the chart is operating in 2D mode.

- Cartesian X Axis

- Show At Back - defines whether interlaced stripes must appear on the back chart wall.

- Show At Floor - defines whether interlaced stripes must appear on the floor chart wall. This setting is ignored when the chart is operating in 2D mode.

- Cartesian Depth Axis

- Show At Side - defines whether interlaced stripes must appear on the side chart wall. This setting is ignored when the chart is operating in 2D mode.

- Show At Floor - defines whether interlaced stripes must appear on the floor chart wall. This setting is ignored when the chart is operating in 2D mode.

- Polar / Radar Axis

- Show - defines whether interlaced stripes must appear on the chart polar / radar plot area.

Axis stripes can operate in three modes - Interlaced, Numeric and DateTime. You select the mode of the stripes from the Mode combo box. The following table describes the possible options:

Axis Stripes Mode	Description
Interlaced	Stripes will be synchronized with the values of the major ticks of the axis. You can control the appearance pattern through the "Length" and "Interval" settings.
Numeric	Stripes will appear at a custom specified numeric step. You control the step at which stripes appear from the "Numeric Step" up down.
DateTime	Stripes will appear at a custom specified date/time step. You control the step at which stripes appear from the "Date Time Step" editor allowing you select a date time unit and unit number.

Length - controls how many steps the stripes will cover.

Interval - controls how many steps the stripes will skip.

Fill Style - invokes the fill style dialog allowing you to control the fill style applied on axis stripes.